Ethernet Interface; Diagnostics Interface; Diagnostics Port Rs 232; Chip Card - Pepperl+Fuchs VBG-ENXK20-DMD-EV Manual

AS-i 3.0 EtherNet/IP+Modbus TCP Gateway
Electrical connection
7.5

Ethernet interface

A
B
The ethernet interface consists of two RJ-45 sockets. It is placed on the left hous-
ing side (see section <Overview of terminals, indicators and operating ele-
ments>). The ethernet interface is driven according to the IEEE 802.3
7.6

Diagnostics interface

The service and diagnostics interface (in conjunction with AS-i Control Tools
software) is used for communication between the PC and the unit.
7.6.1

Diagnostics port RS 232

The service and diagnostics interface is configured as a mini DIN-6 female and it
is placed at the top of the housing (see section <Overview of terminals, indicators
and operating elements>).
7.7

Chip card

The configuration is stored in a fixed installed EEPROM and can be overwritten
by the chip card. The chip card does not have to be inserted in operation.
Warning!
Power must always be turned off when removing or inserting the chip card!
29