AS-i 3.0 EtherNet/IP+Modbus TCP Gateway
General
4.
General
4.1
Product information
This system manual applies to the following Pepperl+Fuchs GmbH equipment:
VBG-ENX-
K20-DMD-EV
VBG-ENX-
K20-DMD
VBG-ENX-
K20-D
1.
AS-i Power24V capable.
The devices can be operated directly on a 24V (PELV) power supply. The gateway VBG-ENX-K20-
DMD-EV is optimized with integrated data coupling coils and adjustable self-resetting fuses for
safe use also of powerful 24V power supplies. The gateways VBG-ENX-K20-D and VBG-ENX-
K20-DMD need to add in Power24V-operation a power supply decoupling unit.
The AS-i 3.0 EtherNet/IP+Modbus TCP Gateway serves to connect AS-i systems
to the superordinate Ethernet controller.
Information!
The device uses one of two protokols: EtherNet/IP or Modbus TCP. The selection
takes place in the menu (see chap. <Installation>).
10
EtherNet/IP +
Gateway IP20
ModbusTCP
EtherNet/IP +
Gateway IP20
ModbusTCP
EtherNet/IP +
Gateway IP20
ModbusTCP
2 AS-i net-
yes, max. 4A/
works, 2 AS-i
AS-i network
Masters
no, max. 8A/
2 AS-i net-
AS-i network,
works, 2 AS-i
redundant
Masters
supply
2 AS-i net-
no, max. 8A/
works, 2 AS-i
AS-i network
Masters
Ethernet
optio
Feldbus +
yes
nal
RS 232
Ethernet
optio
Feldbus +
yes
nal
RS 232
Ethernet
optio
Feldbus +
yes
nal
RS 232
Tab. 4-1.