Pepperl+Fuchs VBG-ENXK20-DMD-EV Manual page 49

AS-i 3.0 EtherNet/IP+Modbus TCP Gateway
EtherNet/IP interface
CA (configuration_active): The configuration-mode is active
AAv (Auto_Address_Available): Automatic programming is possible
AAs (Auto_Address_Assign): Automatic programming is allowed
Cok (config_ok): Configuration error:
Hi-flags (8-bit)
2 1 0
2 2 2
AAe OL DX
AAe: Auto_Address_Enable
OL: Off-line
DX: Data_Exchange_Active
Operational mode (8-bit):
1: configuration mode
0: protected mode
LDS, LAS, LPS, LPF (64-bit)
Byte 7 6
2 2
0 7A 6A
... ...
7 31B 30B
LDS: list of detected slaves
LAS: list of activated slaves
LPS: list of activated slaves
LPF: list of peripheral faults
0: Auto-address is possible
1: Auto-address is not possible
S0 (LDS.0): There is an AS-i slave with address '0'
0: no error
1: error
5 4 3
2 2 2
5A 4A 3A
29B 28B 27B
2 1 0
2 2 2
2A 1A 0A
26B 25B 24B
Tab. 10-14.
Tab. 10-15.
49