Introduction; Scope And Definitions - Edwards RV3 Instruction Manual

1

Introduction

1.1

Scope and definitions

This manual provides installation, operation and maintenance instructions for the Edwards RV3, RV5, RV8 and RV12
Rotary Vane Pumps. The pump must be used as specified in this manual.
Read this manual before installing and operating the pump. Important safety information is highlighted as WARNING
and CAUTION instructions; these instructions must be obeyed. The use of WARNINGS and CAUTIONS is defined below.
Warnings are given where failure to observe the instruction could result in injury or death to
people. The actual symbol shown varies according to the hazard.
Cautions are given where failure to observe the instruction could result in damage to the equipment, associated
equipment and/or process.
The units used throughout this manual conform to the SI international system of units of measurement.
The following warning labels may be present on the pump and used throughout the product documentation:
Warning – an appropriate safety instruction should be followed or a caution to a potential hazard exists.
Warning – dangerous voltage. Indicates hazards arising from dangerous voltages.
Warning – hot surfaces. To indicate that the marked item can be hot and should not be touched without
taking precautions.
Warning – heavy object. Indicates the potential risk of physical injury and requires suitable lifting
equipment to move.
Warning – use protective equipment. Indicates that protective equipment must be used.
© Edwards Limited 2018. All rights reserved.
Edwards and the Edwards logo are trade marks of Edwards Limited.
WARNING
CAUTION
A652–01–880 Issue Y
Page 1