Page 2
Never allow unqualified personnel to attempt to remove or replace any part of the pump. If you have any doubts about the servicing procedures or the products capabilities please contact Edwards. Before returning any equipment to Edwards for repair please follow the Edwards HS1 procedure and complete an HS2 declaration form to warn of any substances used or produced in the equipment that can be dangerous.
Introduction Scope of this manual This manual provides installation instructions for the cartridge kits for the Edwards RV rotary pumps. You must use the cartridge kits as specified in this manual. Use a cartridge kit to replace the cartridge, springs, seals and fluoroelastomer components in an RV rotary pump. We recommend that you use all of the components in the cartridge kit when you service the pump.
Figure 1 - Exploded view of the RV pump A Oil pressure/damp valve assembly 201 Air bleed assembly * Included in the Cartridge Kit: see Table 1 202 Inlet-valve assembly: see Figure 3 B Cartridge: see Figure 2 Included for reference only: see key 208 Top-plate F Gas Ballast check valve assembly 226 Restrictor...
Need help?
Do you have a question about the RV Series and is the answer not in the manual?
Questions and answers