System Configurations; System Contents - Keysight Technologies PNA Series Installation Manual

System Description
N5290/1A Network Analyzer Millimeter-wave System

System Configurations

Table 2-1
S-Parameter measurement capabilities for mm-wave systems using the
N5292A Option 200 and N5292A Option 400 test set controllers.
Table 2-1
Table 2-2

System Contents

Use the tables below to verify that the shipment is complete. These are items
that are supplied with all complete N5290/1A systems. A complete system is
shipped in multiple containers. Be sure to open all containers when verifying
that every system component has been received.
To verify the contents shipped with your product, refer to the "Box Content
List" included with the shipment. For a list of option components, refer to
2-3 on page 2-8
Inspect the shipping container. If the container or packing material is
damaged, it should be kept until the contents of the shipment have been
checked mechanically and electrically. If there is physical damage refer to
"Contacting Keysight" on page
any) for inspection by the carrier and an Keysight Technologies representative.
To reduce the chance of electrostatic discharge, follow all of the
recommendations outlined in
page 1-7.
Keysight N5290/1A Installation Guide
and Table 2-2 document all supported configurations for
PNA Based Configurations
PNA Model(s)
N5222B 2-Port
N5227B 2-Port
PNA-X Based Configurations
PNA-X
Model(s)
N5242B 4-Port
N5247 4-Port
through Table 2-6 on page
4-4. Keep the damaged shipping materials (if
"Electrostatic Discharge Protection" on
Required Test Set
Options Controller
205 N5292A-200
205 N5292A-200
Required Test Set
Options Controller
425 N5292A-400
425 with 029 N5292A-400
2-11.
Interconnect
Kit
N5292A-222
N5292A-224
Interconnect
Kit
N5292A-442
N5292A-444
Table
2-7