Troubleshooting The N5293/5A Millimeter Modules - Keysight Technologies PNA Series Installation Manual

System Installation

Troubleshooting the N5293/5A Millimeter Modules

Troubleshooting the N5293/5A Millimeter Modules
The N5292A test set controller's integrated front panel connectors contain
optical sensors to ramp power up or down gradually when the N5293/5A
millimeter modules are connected and disconnected to prevent damage. Refer
to
Figure 3-23 Millimeter configuration warning when a module is disconnected or not
connected properly (port 1 is shown)
Figure 3-24 Millimeter configuration warning when a port's modules do not match the
factory's calibration data (port 1 is shown)
3- 26
Figure 3-23 and Figure 3-24.
Keysight N5290/1A Installation Guide