N5292A Test Controller Description; Front Panel Features - Keysight Technologies PNA Series Installation Manual

System Description

N5292A Test Controller Description

N5292A Test Controller Description
The N5292A-200 and N5292A-400 millimeter head controllers provide the test
interface between the millimeter-wave test head modules and the PNA/PNA-X
(PNA) series network analyzers.
The millimeter-head controller, when used in conjunction with the
millimeter-wave test head modules and the PNA, provides all of the functions
of a full S-Parameter test set.
The millimeter head controller supplies RF and LO signals to the
millimeter-wave test head modules and returns the down converted reference
and test IF signals to the PNA for processing and display. The N5292A-200 and
N5292A-400 millimeter head controllers also supply the +12 volt bias to each
millimeter-wave head module.
The front panels of the N5292A Option 200 and N5292A Option 400 millimeter
head controllers are illustrated below.
See also

Front Panel Features

Figure 2-6 N5292A Option 200 (2-Port) Front Panel Features
Figure 2-7 N5292A Option 400 (4-Port) Front Panel Features
2- 16
"Compatible Millimeter-Wave Modules" on page 2-19.
Keysight N5290/1A Installation Guide