VERTICAL ADJUSMENT OF LIFTING
DRAW BARS
For vertical adjustment of lifting draw
bars protrude a beam (1) in the direction
of an arrow and by turning a beam do
the setting.
LINKAGES
E453
FIXED AND FREE POSITION OF
LOWER HYDRAULIC DRAW BARS
Fixed position of lower draw bars of hy-
draulics fig.(A):
The head of the pin (1) and a pad (2) are
mounted horizontally.
Free position of lower draw bars of hy-
draulics fig.(B):
The head of the pin (1) and a pad (2) are
mounted vertically.
Free position enables free connection of
a tractor and agriculture tools. Both ends
of draw bars can in this case move freely
vertically one against another.
83
E454
LIMITING DRAW BARS
Limiting draw bars (1) limit, or completely
exclude side swing of lower draw bars.
The adjustment of left and right limiting
draw bar is done by inserting a peg and
to some of the holes (b).
Both limiting draw bars must be
mounted at all times.
NM13N054