Additional Machine Data - Siemens SINUMERIK 802S Start-Up

In the Siemens standard user interface:
S
Press the
S
Press the "Diagnosis" function key.
S
Press the
S
Press the "Language changeover" function key to switch to the alternative language.
7.5

Additional machine data

Limitations:
MD 14514 [0] $MN_USER_DATA_FLOAT [0]
Lubrication:
MD 14510 [1] $MN_USER_DATA_INT [1]
MD 14510 [2] $MN_USER_DATA_INT [2]
Spindle shutdown in "Chuck key position":
MD 14510 [0] $MN_USER_DATA_INT [0]
MD 14514 [1] $MN_USER_DATA_FLOAT [1]
MD 14514 [2] $MN_USER_DATA_FLOAT [2]
MD 35160 [4] $MA_SPIND_EXTERN_VELO_LIMIT
[2]
7.6 Input limitations with regard to the user interface
Spindle:
SINUMERIK 802S
6FC5 597–2AA00–0BP2 (01.02)
key to call the main selection screenform.
key to extend the function key bar.
0 < speed
0 < cut meters
7.5
Max. input value for "Cut meters"
Lubrication time (x 100ms)
Lubrication pause (x 100ms)
Time monitoring Spindle positioning (x 100ms)
Starting speed Spindle positioning
Tolerance window Spindle positioning
Spindle speed limitation from PLC Spindle positioning
< MD 35100 [4] $MA_SPIND_VELO_LIMIT [4]
< MD 14514 [0] $MN_USER_DATA_FLOAT [4]
Manual Machine
Additional machine data
7-161