Siemens SINUMERIK 802S Start-Up page 169

Index
A
Access levels, 4-48
B
Bent acceleration characteristic, 4-88
Actication, 4-88
Parameterization of the axis characteristic,
4-89
Boot messages, 4-55
C
Configuration of the RS232 interface connection
(X8), 2-29
Connecting Handwheels (X10), 2-30
Connecting NCREADY (X20), 2-31
Connecting the digital inputs and outputs (X2003
... X2006), 2-34
Connecting the Feed Drives (X2), 2-23
Connecting the individual components, 2-21
Connecting the Operator Panel, 2-21
Connecting the spindle drive (X3), 2-25
Connecting the spindle measuring system (X4),
2-27
Connection diagram, 2-20
E
ENC and operator panel power supply (X1), 2-37
G
Grounding, 2-38
Grounding diagram, 2-38
I
Installing and Dismantling the SINUMERIK 802C,
2-15
Integrated user program, 6-142
SINUMERIK 802S
6FC5 597–2AA00–0BP2 (01.02)
Interfaces and cables, 2-18
L
LEDs and operating elements on the ENC unit,
2-40
M
Manual machine
Default assignment, 7-165
I/O assignment, 7-162
Installation, 7-157
Machine data, 7-161
Switching the language, 7-160
Switching the user interface, 7-160
Matching the spindle encoders, 4-98
Maximum stepper motor frequency, 4-86
P
Protection levels, 4-48
R
Rotation monitoring of the stepper motor using
BERO, 4-87
S
Servo gain with stepper motors-Controlling without
measuring system, 4-86
U
Updating the System Software, 5-105
V
Velocity control, Bent acceleration characteristic,
4-88
Index
Index-169