Siemens SINUMERIK 802S Start-Up page 115

32910
DYN_MATCH_TIME
- Time constant of dynamic adaption (control parameter set no): 0...5
0
32920 AC_FILTER_TIME
s Smoothing factor time constant for adaptive control
_always 0.0
33050 LUBRICATION_DIST
mm, deg. Traversing distance for lubrication from PLC
_always 100000000
34000 REFP_CAM_IS_ACTIVE
- Axis with reference point cam
_always 1
34010 REFP_CAM_DIR_IS_MINUS
- Approach reference point in minus direction
_always 0
34020 REFP_VELO_SEARCH_CAM
mm/min, Reference point approach velocity
rev/min
_always 5000.0
34030 REFP_MAX_CAM_DIST
mm, deg. Maximum distance to reference cam
_always 10000.0
34040 REFP_VELO_SEARCH_MARKER
mm/min, Creep speed (encoder no.)
rev/min
_always 300.0
34050 REFP_SEARCH_MARKER_REVERSE
- Direction reversal to reference cams (encoder no.)
_always 0
34060 REFP_MAX_MARKER_DIST
mm, deg. Maximum distance to reference mark. Max. distance to 2 reference marks
for distance-coded measuring systems.
_always 20.0
34070 REFP_VELO_POS
mm/min, Reference point positioning velocity
rev/min
_always 1000.0
34080 REFP_MOVE_DIST
mm, deg. Reference point distance/target point for distance-coded system
_always -2.0
34090 REFP_MOVE_DIST_CORR
mm, deg. Reference point offset/absolute offset distance-coded
_always 0.0
34092 REFP_CAM_SHIFT
mm, deg. Electr. cam offset of incremental measuring systems with equidistant zero marks
_always 0.0
34100 REFP_SET_POS
mm, deg. Reference point value/irrelevant for distance-coded system: 0 ... 3
_always 0., 0., 0., 0.
SINUMERIK 802S
6FC5 597–2AA00–0BP2 (01.02)
6.1
0.0
0.0
0.0
***
***
0.0
0.0
0.0
***
0.0
0.0
-
-
0.0
-
Technical Appendix
List of machine and setting data
NEW_CONF
plus DOUBLE
POWER ON
plus DOUBLE
NEW CONF
plus DOUBLE
RESET
*** BOOLEAN
RESET
*** BOOLEAN
RESET
plus DOUBLE
RESET
plus DOUBLE
RESET
plus DOUBLE
RESET
*** BOOLEAN
RESET
plus DOUBLE
RESET
plus DOUBLE
RESET
- DOUBLE
POWER ON
- DOUBLE
RESET
plus DOUBLE
RESET
- DOUBLE
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
2/7
6-115