Intended Use; Applications; Taurus Steel Puls S; Taurus Synergic S; Taurus Basic S - EWM Taurus **5 Basic S Series Operating Instructions Manual

Intended use

Applications

Intended use
3
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!
•
The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
•
Do not improperly modify or convert the equipment!
3.1 Applications
3.1.1

Taurus Steel Puls S

MMA welding system for GMAW-pulse and standard welding as a MMA welding secondary process. It
may be possible to expand the range of functions by using accessories (see the documentation in the
relevant chapter).
3.1.2

Taurus Synergic S; Taurus Basic S

MMA welding system for GMAW standard welding as a MMA welding secondary process. It may be
possible to expand the range of functions by using accessories (see the documentation in the relevant
chapter).
3.2

Use and operation solely with the following machines

A suitable wire feed unit (system component) is required in order to operate the welding machine!
The following system components can be combined with this machine:
Taurus xx5
Basic S
Taurus xx5
Steel Synergic S
Taurus xx5
Steel puls S
14
WARNING
Drive 4X / D200 Drive 4X / D200
Basic S Steel Synergic S
Drive 4X / D200
Steel puls S
099-005589-EW501
20.03.2019