Transport And Installation; Ambient Conditions; In Operation; Transport And Storage - EWM Taurus **5 Basic S Series Operating Instructions Manual

Design and function

Transport and installation

5.3 Transport and installation
Risk of accident due to improper transport of machines that must not be lifted!
Do not lift or suspend the machine! The machine can drop and cause injuries! The
handles, straps or brackets are suitable for transport by hand only!
•
The machine must not be suspended or lifted using a crane.
•
Depending on machine type, equipment for lifting by crane or use while suspended is
available as a retrofitting option > see 9 chapter.
5.3.1

Ambient conditions

T he machine must not be operated in the open air and must only be set up and operated on a
suitable, stable and level base!
•
The operator must ensure that the ground is non-slip and level, and provide sufficient lighting
for the place of work.
•
Safe operation of the machine must be guaranteed at all times.
Equipment damage due to contamination!
Unusually high amounts of dust, acids, corrosive gases or substances can damage the machine
(observe maintenance intervals > see 6.2 chapter).
•
Avoid large amounts of smoke, steam, oily fumes, grinding dust and corrosive ambient air!
5.3.1.1

In operation

Temperature range of the ambient air:
•
-25 °C to +40 °C (-13 °F to 104 °F)
Relative humidity:
•
up to 50 % at 40 °C (104 °F)
•
up to 90 % at 20 °C (68 °F)
5.3.1.2

Transport and storage

Storage in a closed room, temperature range of the ambient air:
•
-30 °C to +70 °C (-22 °F to 158 °F)
Relative humidity
•
up to 90 % at 20 °C (68 °F)
[1]
Ambient temperature dependent on coolant! Observe the coolant temperature range of the torch
cooling
5.3.2

Machine cooling

Insufficient ventilation results in a reduction in performance and equipment damage.
•
Observe the ambient conditions!
•
Keep the cooling air inlet and outlet clear!
•
Observe the minimum distance of 0.5 m from obstacles!
20
WARNING
[1]
[1]
099-005589-EW501
20.03.2019