Console Battery Level Icons; Probe Icons - Verathon BLADDERSCAN PRIME Operation & Maintenance Manual

CONSOLE BATTERY LEVEL ICONS

The battery level icon is displayed in the Status bar at the top of the touch‑screen. The icon and the
percentage value next to the icon indicate the remaining battery power. For information about charging the
battery, see the procedure
Table 6. Battery Level Icon
ICON

PROBE ICONS

The following icons may appear on the probe display.
Table 7. Probe Icons
ICON
Operations & Maintenance Manual: Introduction
Charge the Battery
Battery approximately 100% charged.
Battery approximately 80% charged.
Battery approximately 60% charged.
Battery approximately 40% charged.
Battery approximately 20% charged.
Battery discharged. Replace or recharge battery immediately.
Ready to Scan Mode—When the patient selection has been made and the system
is ready to scan, the probe displays an icon indicating the currently selected patient
orientation. The displayed patient orientation icon on the probe is updated when you
change the patient orientation on the Before You Scan screen.
Scan in Progress Mode—When the Home screen is displayed or a scan is in
progress, the probe displays the BladderScan logo.
Results Mode—After a scan has been completed, the probe displays the position of
the bladder in relation to the probe and the value of the largest volume acquired in the
current exam.
Note: This display can be used to help position the probe. If the bladder is off‑center on
the probe display, move the probe in the direction of the bladder and scan again.
on page 17.
FUNCTION
FUNCTION
15