Verathon BLADDERSCAN PRIME Operation & Maintenance Manual page 47

OPTION 2. PRE‑SCAN ENABLED
You can locate the bladder with or without a bladder outline to assist with aiming. By default, the
BladderScan Prime system has the bladder outline display turned on. To disable the bladder outline, see
Configure Exam Settings
1. With the patient lying in a supine position and with the abdominal muscles relaxed, palpate the patient's
pubic bone.
2. Place an ample quantity of ultrasound gel, with as few air bubbles as possible, midline on the patient's
abdomen, approximately 3 cm (1 inch) above the pubic bone.
3. Hold the probe by grasping it with the probe cable running up your wrist and forearm.
Operations & Maintenance Manual: Using the Instrument
on page 28.
39