Verathon BLADDERSCAN PRIME Operation & Maintenance Manual page 26

1. Before each use, inspect the battery charger, batteries, power adapter, and power cord for damage. If a
component is damaged, do not use it. Contact Verathon
2. Connect the power adapter to the power cord.
3. Connect the power adapter to the battery charger.
4. Plug the power supply into a standard wall outlet. Ensure the power cord can be easily disconnected.
5. Insert one or two batteries into the recesses in the battery charger. It is recommended that you charge
both batteries when setting up the BladderScan Prime system for the first time.
6. Allow the battery to fully charge. The indicator lights on the battery charger indicate the status:
• Green solid—Battery is fully charged
• Green flashing—Battery is fast‑charging
• Yellow solid—Battery charging is suspended or in standby mode
• Red—Charging error. Contact Verathon Customer Care or your local representative.
• Off—No battery detected
18
Customer Care or your local representative.
®