Verathon BLADDERSCAN PRIME Operation & Maintenance Manual page 88

PRINTER SPECIFICATIONS
Table 17. Printer Specifications
SPECIFICATION
Height
Width
Depth
Weight (without paper)
Resolution
Dot size
Printing width
BATTERY SPECIFICATIONS
The BladderScan Prime system is provided with two lithium‑ion batteries. A battery symbol on the
touch‑screen display is always present, indicating how much power remains and when the battery needs to
be changed. You can change the battery whenever necessary.
Adhere to the following recommendations and guidance:
• Use only the battery charger provided with the system. Any other battery charger may damage the
batteries.
• It is recommended that you replace the batteries every 2 years. Contact Verathon
your local representative to order replacement batteries.
Table 18. Battery Specifications
CONDITION
Battery type
Height
Width
Depth
Weight
Battery life
Charging time
Rated capacity
Nominal voltage
Max charging voltage
80
General Specifications
70 mm (2.76 in)
164 mm (6.45 in)
90 mm (3.54 in)
352 g (0.78 lbs)
8 dots/mm (203 dots/in)
0.125 mm by 0.12 mm (0.005 in by 0.005 in)
48 mm (1.89 in), or 384 dots/line
General Specifications
Lithium Ion (Li‑Ion)
23 mm (0.89 in)
151 mm (5.94 in)
59 mm (2.32 in)
326 g (0.72 lbs)
Electrical Specifications
A fully charged battery will typically provide over 24 hours of normal operating
use between charges
2.5 hours (typical)
4.6 Ah, 51 Wh
11.1 V
12.6 V
DESCRIPTION
DESCRIPTION
Customer Care or
®