Setting Information Save And Restore - Fujitsu PRIMEQUEST 480 System Design Manual

CHAPTER 4 Hardware System Management
4.2.11

Setting information save and restore

This function saves and restores PAL/SAL/EFI setting information for each partition
and MMB setting information.
Separate PAL/SAL/EFI settings are required for each partition. However, using the
PAL/SAL/EFI SETUP screen to make the settings in each partition is complicated, so
as shown in
EFI setting information of each partition.
This function enables the following operations:
1) After PAL/SAL/EFI settings are made from the PAL/SAL/EFI SETUP screen in
one partition, the PAL/SAL/EFI setting information for that partition can be
saved and applied to another partition from the MMB.
2) If a failure occurs in an SB and the SB is swapped, the saved PAL/SAL/EFI
information enables restoration of the original state.
Saved information can be stored on a remote terminal. Data saved on a remote
terminal can be restored.
In addition to the function for the PAL/SAL/EFI configuration information, a save
and restore function for saving and restoring MMB and GSWB configuration
information is provided as well.
4-26
Figure 4.21, the MMB provides a save and restore function for PAL/SAL/
C122-B001-02EN