Fujitsu PRIMEQUEST 480 System Design Manual page 32

Contents
Table 5.7
Table 5.8
Table 5.9
Table 5.10 Interface support for jumbo frames . . . . . . . . . . . . . . . . . . . . . . . . 5-10
Table 5.11 Interface support for rate control . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11
Table 5.12 How transmission and receiving are handled depending on port setting
Table 5.13
Table 5.14
Table 5.15 Addition of a VLAN Tag to BPDU . . . . . . . . . . . . . . . . . . . . . . . . . 5-27
Table 5.16
Table 5.17
Table 5.18
Table 5.19 Notes on the Speed/Duplex setting of the interface . . . . . . . . . . . 5-29
Table 5.20 Flow control setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Table 5.21 Load distribution algorithm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Table 5.22 Example of load distribution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
Table 6.1
Table 7.1
Table 8.1
Table 10.1 Comparison of backup methods . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
Table 11.1 Areas used to collect dump data . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Table 11.2 Devices that can be used as a dump device . . . . . . . . . . . . . . . . . 11-2
Table B.1
Table B.2
Table B.3
xxiv
Auto-negotiation priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interface support for flow control . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow control and restriction list . . . . . . . . . . . . . . . . . . . . . . . . . . .
statuses and frame types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
Conditions under which an entry is deleted from the learning table 5-25
Handling of BPDU and PAUSE frames according to the STP setting
conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
CPU-send frame mirroring enabled/disabled . . . . . . . . . . . . . . . . 5-27
VLAN Tag of mirroring frame (transfer from port A to port B) . . . . 5-28
VLAN Tag of mirroring frame (transfer from port B to port A) . . . . 5-29
System Mirror Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Component hot swapping and/or redundant configuration availability 7-
3
Data communication among SBs, IO_Units, and Other Ports . . . .
LED list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED Display of the operator panel (cabinet) and MMB . . . . . . . . . B-10
LED display of an HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-11
5-7
5-8
5-9
6-7
8-9
B-6
C122-B001-02EN