Mounting Conditions Of Pci Cards And Usable Built-In I/Os; 2.3.5.1 Mounting Conditions Of Pci Cards; Table 2.8 Pci Card Mounting Conditions - Fujitsu PRIMEQUEST 480 System Design Manual

CHAPTER 2 General Hardware Configuration
2.3.5

Mounting conditions of PCI cards and usable built-in I/Os

2.3.5.1 Mounting conditions of PCI cards

Table 2.8
series.
A LAN card can be mounted only in a 100-MHz PCI slot within an IO_Unit or
PCI_Box.
A SCSI card can be mounted only in PCI Slot #1 or PCI Slot #3 of an IO_Unit with
a priority rank of 1 or 2 (see
A Fibre Channel (FC) Card can be mounted in any PCI slot.
Slot#
PCI Clock[MHz]
Ultra320 SCSI Card (dual channel)
Fibre Channel Card
(2-Gbps × 1 port)
1000Base-T LAN card
(dual channel)
1000Base-SX LAN card
(single channel)
1000Base-SX LAN card
(dual channel)
Y: Slot in which the card can be mounted
*1: A SCSI card can be mounted only in PCI Slot #1 or PCI Slot #3 of an IO_Unit
with a priority rank of 1 or 2 (see
defined and operated, these priority ranks apply to each partition.
*2: An SAN-bootable FC card can be mounted in only PCI Slot#1 and PCI Slot#3
of an IO_Unit with a priority rank 1 or 2 (see
partitions are defined for operation, these priority ranks apply to each partition
(same conditions as the SCSI card slots in *1).
*3 The PCI slot numbers of the PCI units in the PCI_Box are PCI Slot#1, PCI
Slot#2, and PCI Slot#0 from the left when viewed from the front.
2-14
contains the mounting conditions of PCI cards for the PRIMEQUEST

Table 2.8 PCI card mounting conditions

Table 2.9).
PCI slots in an IO_Unit
0 1 2
100 133 100
Y(*1)
Y Y(*2) Y
Y Y
Y Y
Y Y
Table 2.9). If two or more partitions are
Table
PCI slots in a PCI unit
of a PCI_Box
3 1(*3) 2
133 100 133
Y(*1)
Y(*2) Y Y
Y Y
Y Y
Y Y
2.9). When two or more
C122-B001-02EN
0(*3)
100
Y