Fujitsu PRIMEQUEST 480 System Design Manual page 238

CHAPTER 10 Backup and Restoration
For Windows:
If data in Partition #0 is backed up, it is necessary to use NTBackup on the remote
host side (Partition #n) for the backup and restoration work.
First, perform remote-login to Partition #n from Partition #0 that is connected to the
KVM console by using remote desktop connection. Backup and restoration can be
performed after assigning the Partition #0 as a network drive.
However, the server to be backed up and the remote host must be placed in the same
network.
Command submitted
from the KVM
console
Figure 10.2 Backup to the remote host by using a standard utility
10-4
LAN for backup
PRIMEQUEST
K
V
M
(when using the KVM console)
Partition#n
Remote host
Partition#1
Partition#0
Restoration
Tape unit
Backup
C122-B001-02EN