Statistical Information And Log Information Function - Fujitsu PRIMEQUEST 480 System Design Manual

5.2.9

Statistical information and log information function

This function displays statistical information and log information.
As statistical information, it is possible to display the number of transmitted and
received frames and the number of error frames of the entire unit or for each port.
As log information, the following items can be displayed.
elog (Error log)
When an abort occurs due to an abnormality, abort processing is started and the log
is archived. The log is displayed.
tlog (Trap log)
A trap that SNMP agent reports to SNMP manager is archived as a log. The log is
displayed.
llog (Line log)
The Linkup/Linkdown log of a switch port is archived. The log is displayed.
mlog (Message log)
Messages that programs output as needed is archived as a log. The log is
displayed.
5.2.10 SNMP
Simple Network Management Protocol (SNMP) supports the agent functions in v1,
v2, and v3.
SNMP can implement read (Get) and write (Set) targeting agent unit information or
MIB information in response to an inquiry from an SNMP manager belonging to a
community to which access right is given. SNMP also can report a trap message for
an event occurring in the unit to the specified SNMP manager.
SNMP supports the following Management Information Bases (MIBs).
- MIB ..........................................................Standard MIB (complying with
- Ether Like MIB ........................................Transmit/receive error information of
- Bridge MIB ..............................................Objects related to bridges (complying
- Remote network monitoring (RMON).....Statistical information on traffic.
- Original MIB............................................GSWB original
C122-B001-02EN
5.2 Main GSWB Functions
RFC1213)
Ethernet (complying with RFC1643)
with RFC1493)
Event notification, log information
(complying with RFC1757)
5-21