Module Description - Weidmuller UR20-4COM-IO-LINK Manual

4

Module description

Digital communication module UR20-4COM-IO-LINK (order no. 1315740000)
The digital communication module UR20-4COM-IO-LINK is
an IO-Link master according to IO-Link specification V1.1.2.
One IO-Link device can be connected to each plug-in connec-
tor. The IO-Link devices must comply with port class A. Port
class B is possible if additional potential distribution modules
are used. One digital input can be used at each plug-in con-
nector.
Process data is exchanged with the IO-Link device con-
nected via each IO-Link port. In addition, acyclic data can be
exchanged (diagnosis data, parameter data, status informa-
tion). The parameter data of the IO-Link devices connected
can be stored in the master module where they are managed
from a parameterising server (Data Storage). This means that
the IO-Link master or an IO-Link device (from IO-Link specifi-
cation version 1.1) are very easy to replace.
The four communication channels can also be used as digi-
tal inputs or outputs with standard field devices.
A status LED is assigned to each channel. The module elec-
tronics supply the connected sensors with power from the
).
input current path (I
IN
The inputs are protected against voltage surges and overcur-
rent. Voltages that exceed ± 30 V may cause the destruction
of the module.
2547720000/03/09.2019
You can use the "u-remote IO-Link configurator" software to
configure the IO-Link system for the UR20-4COM-IO-LINK.
Manual Communication module UR20-4COM-IO-LINK
4 Module description
11