Mazda MX-5 Miata Sport 2007 Manual page 92

2006-08 ENGINE Mechanical - Overhaul - 2.0L (LF) & 2.3L (L3) - Mazda6 & MX-5 Miata
Fig. 89: Rear Oil Seal Bolt Tightening Sequence
Courtesy of MAZDA MOTORS CORP.
Drive Plate (ATX), Flywheel (MTX) Assembly Note
1. Hold the crankshaft using the SST .
2. Tighten the bolts in the 3 steps in the figure.
Tightening torque
1. 46-54 N.m
{4.70-5.50 kgf.m, 34.0-39.8 ft.lbf
2. 76-84 N.m
{7.75-8.56 kgf.m, 56.1-61.9 ft.lbf
3. 108-116 N.m
{11.1-11.8 kgf.m, 79.7-85.5 ft.lbf
2007 Mazda MX-5 Miata Sport