The Device Settings Menu - Edwards ModuLaser Installation Manual

Chapter 3: Configuration and Commissioning

The Device Settings menu

Use the Device Settings menu to upgrade device firmware.
For more information on the other options in this menu, see Access level 2 user
operation and configuration on page 41.
Upgrading device firmware
Use the Upgrade menu to upgrade device firmware. All devices in a cluster are
upgraded simultaneously.
Firmware upgrades are typically distributed as a ZIP file. The ZIP file must be
unzipped to a USB flash drive at _ASPIRATION\Update\ before starting the
upgrade procedure.
To upgrade all devices in a cluster:
1. Unzip the upgrade folder to a USB flash drive, as described above.
2. Remove the display cover, insert a USB flash drive into the USB connector,
and replace the cover.
3. Select Device Settings from the Main menu, and then select Upgrade.
4. Select the device that you want to view or press F1 (Go To) to search for a
device by the device address.
The selected device must be a display module. All devices included in the
display module cluster will be upgraded.
5. When prompted, browse to and select the folder on the USB flash drive that
contains the firmware upgrade files.
The upgrade procedure may take a long time to complete. If necessary, press
Cancel to safely abort the upgrade.
6. After completion, follow the onscreen instructions to restart the system.
72 ModuLaser Modular Aspirating Smoke Detector Installation Manual