The Device Settings Menu - Edwards ModuLaser Installation Manual

To change the time:
1. Select General Settings from the Main menu, and then select Date and Time.
2. Select Time and enter the time in the required time format.
The configured time format is displayed above the time field but cannot be
changed from this menu. To change the time format, Select General Settings
from the Main menu, and then select Localization.
3. Press F1 (Set) to save your changes and exit to the previous screen.

The Device Settings menu

Use the Device Settings menu to add a device description, to view or configure
latching status, inputs and outputs, to load and save configuration files, and to
return all settings to the factory default values.
For more information on the other options in this menu, see Access level 2 user
operation and configuration on page 41.
Adding a device description
Use the Device Details menu to add a description to a device.
To add a device description:
1. Select Device Settings from the Main menu, and then select Device Details.
A list of devices is displayed.
2. Select the device that you want to view or press F1 (Go To) to search for a
device by the device address.
The device type details are displayed.
3. Select Text, and then add a device description (max. 16 characters).
4. Press F1 (Save) to save your changes and exit to the previous screen.
5. If you have no other configuration changes to make, then press F1 (Apply)
from the Main menu or the submenu to apply the changes to the system.
ModuLaser Modular Aspirating Smoke Detector Installation Manual
Chapter 3: Configuration and Commissioning
55