Copyright
Trademarks and
patents
Manufacturer
Version
Certification
European Union
directives
Contact information
© 2019 UTC Fire & Security. All rights reserved.
ModuLaser is a trademark of UTC Fire & Security.
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
UTC CCS Manufacturing Polska Sp. Z o.o.
Ul. Kolejowa 24. 39-100 Ropczyce, Poland.
Authorized EU manufacturing representative:
UTC Fire & Security B.V. Kelvinstraat 7, NL-6003 DH, Weert, The
Netherlands.
REV 08
2004/108/EC (EMC directive). Hereby, UTC Fire & Security declares
that this device is in compliance with the essential requirements and
other relevant provinsions of Directive 2004/108/EC.
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
IEC 60825-1 This product is a Class I Laser product. The unit
incorporates a Class 3B embedded laser which must not be removed
from the detector.
For contact information, see https://firesecurityproducts.com/.
Need help?
Do you have a question about the ModuLaser and is the answer not in the manual?
Questions and answers
does a system smoke detector require a box or can I mount it with just a ring
The Edwards ModuLaser system requires a backplane to be fixed to the wall for installation. The detector and display modules are then mounted onto this backplane. This suggests that a simple ring mount is not sufficient for installation.
This answer is automatically generated