The Communications Menu; The Log Menu - Edwards ModuLaser Installation Manual

3. Select the detector that you want to view or press F1 (Go To) to search for a
detector by the device address.
The saved baseline and current status details for the detector are displayed
side by side. Press F1 or use the left and right arrow keys to toggle between
fire and flow status comparisons.
4. Press F3 (Exit) to return to the Main menu.

The Communications menu

Use the Communications menu to safely remove a USB flash drive.
To remove a USB device:
1. Select Communications from the Main menu, and then select Unmount USB
Device.
Remove the USB flash drive when prompted.

The Log menu

Use the Log menu to view and save an event log or a chart record.
• An event log stores a detailed list of all device events. Event logs are
available for displays and detectors.
• A chart record is a series of sample detection records. Chart records are only
available for detectors.
To save event logs and chart records, a USB flash drive must be inserted into the
USB connector in the display module.
Note: If your flash drive is not recognized by the module, reformat it as FAT32
from a PC and try again. If the problem persists, try a different flash drive.
Viewing and saving event logs
To view an event log:
1. Select Log from the Main menu, and then select View Event Log.
2. Select the device that you want to view or press F1 (Go To) to search for a
device by the device address.
The device event log is displayed. Use the up and down arrows to scroll
through the events in the list.
3. Press F3 (Exit) to return to the Main menu.
To save an event log:
1. Remove the display cover, insert a USB flash drive into the USB connector,
and replace the cover.
2. Select Log from the Main menu, and then select Save Event Log.
ModuLaser Modular Aspirating Smoke Detector Installation Manual
Chapter 3: Configuration and Commissioning
47