Saab SONETT III Service Manual page 84

DESCRIPTION
General
The transmission in the Sonett III is largely identical with
that in the Saab V4, the differences being that the gear-
box has a final gear, pinion and crown wheel, with the
ratio 9:42 and that gear shifting is done with a floor gear
lever located between the seats. The clutch, universal
joints and drive shafts are, however, the same.
Clutch
General
Clutch operation is hydraulic and comprises a master cyl-
inder connected to the clutch pedal and a slave cylinder
that actuates the clutch.
The master cylinder is connected to a reservoir which
must be kept filled with brake fluid up to the level mark
on the outside of the reservoir.
1. Brake fluid container
2. Clutch fluid container
Gearbox
The Sonett III is equipped with the same type of 4-speed
gearbox as the Saab V4. See Service Manual for Saab V4.
CLUTCH PEDAL WITH ADJUSTMENT MECHAN ISM
1. Adjusting screw
2. Lock nut
3. Bleeder screw
Nov. 1972
SAAB
400-1