Saab SONETT III Service Manual page 128

Pry off the glass from the rear sealing and remove it
together with the retainer channel. Collect the spacers
between the retainer channel and door frame.
Opening side windows
To remove the side windows, back off and remove the
three screws retaining the locking mechanism and then
unhook the window from the "hinges".
REMOVAL OF NUTS FOR THE RETAINER CHANNEL,
AS FROM MODEL 1971
Installation
1. F it a new retainer channel to the door frame and fill
it with a suitable adhesion compound, e.g. Epoxy resin.
As from model 1971:
The joint between the retainer channel and door frame
must be sealed with suitable sealing compound.
2. F it the window glass into the U-shaped retainer channel
and press it into the rear sealing.
3. Model 1970:
F it a new seal ing strip, attaching it with pop rivets or
self-tapping screws. Seal the joint at the top with a
suitable sealing compound, e.g. Epoxy resin.
4. Reattach the plastic door shell with pop rivets.
5. Ref it the door.
REMOVAL OF OPENING SIDE WINDOW
843-3
SAAB
Nov. 1972