Appendix F Model 2700 Profibus Block Parameters; Overview; Slot Identification; Physical Block - Emerson Micro Motion 2700 Configuration And Use Manual

Appendix F
Model 2700 PROFIBUS Block Parameters
F.1

Overview

This appendix describes the block parameters of the Model 2700 transmitter with PROFIBUS-PA.
F.2

Slot identification

Table F-1 shows the slot assignment for blocks.
Table F-1 Block slot assignment
Slot Assigned block
0

Physical block

1 Analog input block 1
2 Analog input block 2
3 Analog input block 3
4 Totalizer block 1
5 Analog input block 4
6 Totalizer block 2
7 Totalizer block 3
8 Totalizer block 4
9 Analog output block 1
10 Analog output block 2
11 Transducer block 1
12 Transducer block 2
F.3 Physical block
Table F-2 shows the parameters for the physical block.
Table F-2 Physical block parameters
Index Parameter Mnemonic
Standard Parameters
16 BLOCK_OBJECT
17 ST_REV
18 TAG_DESC
19 STRATEGY
Configuration and Use Manual
Definition Message
Type
This object contains the RECORD
characteristics of the block
A block has static block SIMPLE
parameters that are not changed
by the process. Values are
assigned to this parameter during
the configuration of optimization.
The value of ST_REV increases
by 1 after every change of a static
block parameter.
Every block can be assigned a SIMPLE
textual TAG description. The
TAG_DESC must be unambiguous
and unique in the field bus system.
Grouping of function block. The SIMPLE
STRATEGY field can be used to
group blocks.
Data Type/ Size Store Default
Structure /Rate Value
(HZ)
DS-32 20 Cst ----
Unsigned16 2 N 0
Visible 32 S ' '
STRING
Unsigned16 2 S 0
Access Enumerated List of Modbus
Values / Range Register /
Coil
R NA NA
R NA NA
R/W NA NA
R/W NA NA
151