Shuttle Timeout; Bar Code Quality - Printronix P5005B User Manual

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Tear Bar Distance
Allows fine and course adjustment of the tear bar position. For a
pedestal model printer with a quick access cover using the front
paper exit, the default (5.12 inches) is used. You can specify 4.5 to
10.5 inches in .01 inch increments to accommodate variations in
cover and form design. If the printer is not equipped with a quick
access cover, or when rear paper exit is desired, the tear distance
should be set to accommodate the rear position. This requires
setting the Tear Bar Distance to 9.92 inches.

Shuttle Timeout

The amount of time the shuttle continues moving after no data is
received. If your host is slow, setting the number to a higher value
will prevent the printer from spending time shuttling up and down
between data bursts.

Bar Code Quality

Determines the bar code resolution for all emulations, except IPDS.
(See "IPDS Emulation" on page 183 to set the bar code quality for
IPDS.)
•
Draft. Bar code resolution is set at 60 x 72.
•
Dark. Bar code resolution is set at 120 x 72.
•
Recommended. Bar code resolution is set at 120 x 144 in
unidirectional mode.
Menu
215