Omron NJ Series Network Connection Manual page 60

10. Appendix 2 Setting Procedure without the Configuration Files
10.4.2. Setting the Device
Set the device and register it in the DeviceNet Unit (create a scan list).
1
Right-click the DeviceNet Unit
icon and select Parameter -
Edit.
2 The Edit Device Parameters
Dialog Box is displayed.
Slave unit (#00) is displayed in
the Unregister Device List.
Select the Auto allocation as is
registered Check Box.
Click the ↓ button.
Slave unit (#00) is registered in
the Unregister Device List.
Confirm that the sizes and
channels are set as follows, and
click the OK Button.
OUT Size:4 Byte
Out Ch:3200:Bit00
In Size:4 Byte
In Ch:3300:Bit00
3
Confirm that node address #63
is displayed under the slave unit
icon on the Network
Configuration Window.
57