Omron NJ Series Network Connection Manual page 18
Machine automation controller devicenet connection guide
Hide thumbs
Also See for NJ Series:
- User manual (668 pages) ,
- Troubleshooting manual (250 pages) ,
- Startup manual (168 pages)
Table of Contents
Advertisement
7
Push the DeviceNet
Communications Unit at the
position of the optional cover
until it clicks into place.
8
Press down on the indicated
top-left corner of the DeviceNet
Communications Unit and
ensure the connector of the
DeviceNet Communications Unit
is properly connected.
9
Confirm that there is no gap
between the top edges of the
DeviceNet Communications Unit
and the Inverter casing.
10
Secure the DeviceNet
Communications Unit to the
Inverter with a mounting screw.
7. Connection Procedure
15
Advertisement
Table of Contents
