Omron NJ Series Network Connection Manual page 54

Machine automation controller devicenet connection guide

Hide thumbs Also See for NJ Series:

Table of Contents

10. Appendix 2 Setting Procedure without the Configuration Files

Confirm that the synchronized

data is displayed with the color

specified by "Synchronized"

color, and that a message is

displayed stating "The

synchronization process

successfully finished".

If there is no problem, click the

Close Button.

*If the synchronization fails,

check the wiring and repeat the

procedure described in this

section.

Select Reset Controller from

the Controller Menu.

*When Mode is set to RUN

Mode, Reset Controller cannot

be selected. In this case, select

Mode - PROGRAM Mode from

the Controller Menu to change

to PROGRAM mode and

perform the procedure in this

step.

A confirmation dialog box is

displayed several times. Click

the Yes Button.

Table of Contents

3g3mx2 series