Device Configuration - Omron NJ Series Network Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedure of this document are as
follows.
Personal computer
(Sysmac Studio
installed,
OS:Windows7 )
USB cable
Manufacturer
OMRON DeviceNet Unit
(Master Unit)
OMRON CPU Unit
OMRON Power Supply Unit
OMRON DeviceNet cable
OMRON T-branch Tap
OMRON Sysmac Studio
OMRON CX-Integrator
OMRON Sysmac Studio project file
OMRON CX-Integrator project file
- Personal computer
(OS: Windows 7)
- USB cable
(USB 2.0 type B connector)
OMRON Inverter
OMRON DeviceNet Communications
Unit
Precautions for Correct Use
To use configuration files, prepare the latest "Sysmac Studio project file" and "CX-Integrator
project file" in advance.
(To obtain the files, contact your OMRON representative.)
Additional Information
For information on the DeviceNet cable and network wiring, refer to Section 2 Network
Configuration and Wiring in the DeviceNet Operation Manuel (Cat.No. W267).
Connect a terminating resistance to each end of the trunk line of the DeviceNet.
5. Applicable Devices and Support Software
NJ501-1500+
CJ1W-DRM21
Name
CJ1W-DRM21
NJ501-1500
NJ-PA3001
DCA1-5C10
DCN1-1C
SYSMAC-SE2[][][]
(Bundled in the Sysmac Studio.)
OMRON_3G3MX2_DN_EV100.S
MC
OMRON_3G3MX2_DN_EV100.cin
-
-
3G3MX2-A2015
3G3AX-MX2-DRT-E
3G3MX2-A2015 +
3G3AX-MX2-DRT
DeviceNet cable
T-branch Tap (DCN1-1C)
Model Version
Ver.1.3
Ver.1.00
Ver.2.51
Ver.1.00
Ver.1.00
Ver.1.1
6