10. Appendix 2 Setting Procedure without the Configuration Files
10.3.6.
Making Settings in the Watch Tab Page
Make settings in the Watch Tab Page to check data that are sent and received.
1
Select Watch Tab Page from the
View Menu.
2
The Watch Tab Page is displayed in
the lower section of the Edit Pane.
3
Enter the following names to
monitor in the Name Cell on the
Watch Tab Page. To enter a new
name, click a cell stating Input
Name.
DN00_STA_IN[5]
DN00_STA_IN[6]
DN00_CMD_OUT[0]
DN00_DATA_OUT
*The settings are used in 7.6.2.
Checking Data That Are Sent and
Received.
53