7. Connection Procedure
This section describes how to connect the Controller on the DeviceNet network using the
"procedures for using configuration files".
This document explains the procedures for setting up the Controller and Inverter from the
factory default setting. For the initialization, refer to Section 8 Initialization Method.
7.1. Overview of Setting Up Remote I/O Communications
The following shows the relationship of processes to operate DeviceNet remote I/O
communications using the "procedures for using configuration files".
Configuration files Sysmac Studio
Importing
project file
Sysmac Studio
Transferring
project data
project file
Personal computer
Transferring
scan list
Controller
7. Connection Procedure
CX-Integrator
project file
Opening
project file
CX-Integrator
Destination
device
11