Removing The Oven Door Gasket - KitchenAid JOB AID 4317282 Technical Education

REMOVING THE OVEN DOOR GASKET

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
CAUTION: When you work on the dual fuel
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
1. Open the oven door to its fully open posi-
tion.
2. Remove the screw from the door gasket
bracket and remove the bracket from the
range.
Door Gasket
3. Pull the ends of the gasket out of the liner
holes.
Gasket Clips
REASSEMBLY NOTE: When you install the
new gasket, make sure that all of the clips are
seated in their liner holes, and that the ends of
the gasket are pushed fully into their holes. Use
the pointed end of a pencil to push the gasket
ends into the holes.
2-28
Gasket Bracket
Screw