KitchenAid JOB AID 4317282 Technical Education page 17

4. To remove the display:
a) Remove the front panel (see step 3 on
the previous page).
b) Remove the two display screws from
under the chassis.
Display
Screws
c) Carefully remove the display and mount-
ing bracket from under the chassis.
d) Disconnect the 2-wire cable at display
board connector JP04.
Display
16-Wire Cable JP01
2-Wire Cable JP04
e) Disconnect the 16-wire cable at the
selector and set control assembly board
connector JP01.
f) Unclip the display board from the plas-
tic holder. Be careful not to overbend
the clips or you will break them.
Clip
Clip
Continued on the next page.
2-9
Display Board
Clip