Removing The Suppressor Board - KitchenAid JOB AID 4317282 Technical Education

REMOVING THE SUPPRESSOR BOARD

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
CAUTION: When you work on the dual fuel
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
1. Turn off the gas and electrical power going
to the range.
2. Pull the range away from the wall so that
you can access the rear panel.
3. Remove the braces and rear panel from
the range (see page 2-17).
4. Remove the blower motor assembly cover
(see page 2-20).
5. Remove the two screws from the suppres-
sor board.
6. Disconnect the wires from the terminals
and remove the board from the range.
Screws
Suppressor Board
2-21