REMOVING THE OVEN TEMPERATURE SENSOR
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
CAUTION: When you work on the dual fuel
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
Turn off the gas and electrical power going
to the range.
Remove the racks from inside the oven.
Remove the two mounting screws from
the oven temperature sensor and pull the
connectors out of the mounting hole in the
Disconnect the sensor connector from the
main wire harness connector.