KitchenAid JOB AID 4317282 Technical Education page 18

5. To remove the selector and set control
assembly:
a) Remove the cooktop (see page 2-2).
b) Remove the top access panel (see
page 2-4).
c) Remove the center screws from the
selector and set bezel rings (see step
3a on page 2-8).
d) Remove the front panel and pushbutton
boards (see pages 2-8 & 2-9).
e) Disconnect the 16-wire cable at the
selector and set control assembly board
connector JP01.
Selector Control
16-Wire Cable JP01
Set Control
2-10
f) Disconnect the 2-wire cable from the
electronic range control board connec-
tor JP40.
g) Disconnect the 16-wire cable from the
electronic range control board connec-
tor JP04.
JP40
Elec-
tronic
Range
Control
Board
JP04