Removing The Broil Element - KitchenAid JOB AID 4317282 Technical Education

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
CAUTION: When you work on the dual fuel
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
1. Turn off the gas and electrical power going
to the range.
2. Remove the racks from inside the oven.

REMOVING THE BROIL ELEMENT

3. Remove the two front bracket screws and
two rear bracket screws from the broil
element.
4. Carefully pull the element forward so that
the terminal connectors are through the
oven liner holes, and disconnect the wires
from the terminals.
2-14
Front Bracket
Screws
Broil
Element
Rear Bracket
Screws
Element Wires