Removing The Oven Door Glass, Hinges, & Handle - KitchenAid JOB AID 4317282 Technical Education

REMOVING THE OVEN DOOR GLASS, HINGES, & HANDLE
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
CAUTION: When you work on the dual fuel
range, be careful when handling the sheet
metal parts. Sharp edges may be present, and
you can cut yourself if you are not careful.
1. Remove the oven door from the range
(see page 2-25).
2. Place the oven door on a padded work
surface with the front decorative glass
facing down.
3. Remove the two top door liner screws and
the two door glass bracket screws, and lift
the liner assembly off the decorative door
glass and handle.
Top Liner Screws
Door Glass
Bracket Screws
4. To remove the outer door glass:
a) Remove the three outer glass holder
screws and two outer glass bracket
screws from the door liner.
b) Lift the outer glass with the glass holder
off the door liner.
c) Remove the bracket.
Outer Glass Holder Screws
Outer Glass Bracket Screws
5. To remove the center door glass, re-
move the bottom bracket, (it is loose), and
slide the two top corners of the glass out of
the door liner slots.
Center Door Glass Corners
Center Door Glass
Remove Loose Bracket
2-26
Outer Door Glass