WAGO 750 Series Manual page 94

90 •
Board Support Package (BSP)
Ethernet Interface Services
•
•
•
•
•
•
•
•
•
Example:
After the log-in on the buscoupler via
netflash
netflash –k –n –j –r /dev/mtd3 192.168.1.11 jffs2.img
netflash: fetching file "jffs2.img" from 192.168.1.11
...............................................................
...............................................................
netflash: got "jffs2.img", length=1159368
netflash: flashing root filesystem, kill is forced
Connection closed by foreign host.
-j
The image to be written contains the JFFS2 file system
-k
Processes are not terminated (will be ignored if the Root file system is in
the flash memory)
-l
Protects the areas of the flash memory after writing data
-n
Image has no checksum (image without version information)
-p
Contains the blank areas of the flash memory
-s
Stops deleting and writing at the end of the input data
-t
Checks the image and deletes it if it is faulty
-u
Enables the areas of the flash memory before data is written
-v
Indicates the version number
could look like the following:
, an example application with
Telnet
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler