Dynamic Configuration
• BootP
• DHCP
Save Configurations
If a user with root rights enters his name and the correct password and then
clicks on the S
save the changed values in several different places of the Linux fieldbus
coupler. The new values will only be activated after a reboot of the Linux
fieldbus coupler because theEthernet interface is only initialized during a boot
process.
Note
If wrong values are entered, they cannot possibly be corrected again after a
reboot of the Linux fieldbus coupler since it is no longer possible to access
the Linux coupler. A correction of the values is then only possible via the
serial interface using the Linux console
(see chapter 4.3, 4.6.1 and 4.6.2).
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler
Activates configuration via BootP
Activates configuration via DHCP
AVE CONFIGURATION
Board Support Package (BSP)
Web-Based Management (WBM)
button, the corresponding CGI file will
• 75