WAGO 750 Series Manual page 185

Source code description: kernelmsg.c
The kernelmsg.c file displays the kernel messages on the screen. The file
inludes the function
main_kernelmsg()
main_kernelmsg()
on the screen.
Source code description: eeprom.c
The eeprom.c file displays the EEPROM messages on the screen. The file
inludes the function
main_eeprom()
screen in a table.
Source code description: config.c
The config.c file displays the IO modules (sorted by type) that are connected
to the Linux fieldbus coupler on the screen.
The file inludes the functions:
•
•
•
•
•
•
•
The
module (type, slot number etc.).
The
parameters of the individual analog modules separately in pop-up tables.
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler
reads the kernel message ring buffer and displays the data
main_eeprom().
reads the /dev/eeprom device file and displays the data on the
printStandard()
printAnalogOutput()
printAnalogInput()
printDigitalOutput()
printDigitalInput()
printSpecial()
main_config()
function outputs the standard parameters of an IO
printStandard()
printAnalogOutput()
Example Program for a CGI Application
or function displays the special
Input()
Application Examples • 181