WAGO 750 Series Manual page 158

154 • I/O Modules
750-404/000-005
The above Counter Modules have a total of 5 bytes of user data in both the
Input and Output Process Image (4 bytes of counter data and 1 byte of
control/status). The two counter values are supplied as 16 bits. The
following tables illustrate the Input and Output Process Image, which has a
total of 3 words mapped into each image. Word alignment is applied.
750-638, 753-638
Byte Destination
Offset
High Byte
0 -
1 D1
2 D3
Byte Destination
Offset
High Byte
0 -
1 D1
2 D3
Byte Destination
Offset
High Byte
0 -
1 D1
2 D3
Byte Destination
Offset
High Byte
0 -
1 D1
2 D3
Input Process Image
Low Byte
S
D0
D2
Output Process Image
Low Byte
C
D0
Counter Setting Value
D2
Input Process Image
Low Byte
S
D0 Counter Value of Counter 1
D2 Counter Value of Counter 2
Output Process Image
Low Byte
C
D0 Counter Setting Value of Counter 1
D2 Counter Setting Value of Counter 2
Remark
Status byte
Counter Value
Remark
Control byte
Remark
Status byte
Remark
Control byte
WAGO-I/O-SYSTEM 750
Linux Fieldbus Coupler